[Test-Equipment] FS: Heath IM4180 FM deviation meter

Mike Manes mrmanes at gmail.com
Tue Apr 22 02:17:25 EDT 2008


Just put a scope on the output of the receiver discriminator.  Calibrate
the voltage vs deviation by bumping the input sig by 5 KHz or some other
known amount.  Works great, and even shows clipping if you use a sine
wave modulation signal.
73 de Mike W5VSI

Brooke Clarke wrote:
> Hi George:
> 
> Another FM radio test is SINAD or "SIgnal Noise And Distortion" how to 
> make that measurement is on my web page: 
> http://www.prc68.com/I/MTE.shtml#Test
> I haven't come up with a simple way to measure deviation, but maybe 
> someone here has?
> 
> Have Fun,
> 
> Brooke Clarke, N6GCE
> http://www.prc68.com/P/Prod.html  Products I make and sell
> http://www.prc68.com/Alpha.shtml  All my web pages listed based on html 
> name
> http://www.PRC68.com
> http://www.precisionclock.com
> http://www.prc68.com/I/WebCam2.shtml 24/7 Sky-Weather-Astronomy Web Cam
> 
> kc7hkp at comcast.net wrote:
>> Hi Dick
>> What is FM Deviation ?
>> I have not heard this word before in ham radio .
>> Sorry to bother you
>> George
>>
>> -- 
>> KC7HKP George Yazzolino 14801 NE 20th Circle Vancouver, Wa. USA ,98684 
>> Grid CN-85 kc7hkp at arrl.net
>>
>> -------------- Original message -------------- From: "Dick KF4NS" 
>> <kf4nsradio at verizon.net>
>>
>>> This test equipment measures peak transmitter FM deviation 25-1000MHZ 
>>> from ham, broadcast, or any FM transmitter in the freq range. 50 ohm 
>>> BNC input jack for direct or antenna connection. Has demodulated 
>>> audio output and scope jacks. There are four ranges, 2KHZ to 75KHZ. 
>>> Operates from internal batteries or 10-15VDC external power supply of 
>>> 200ma or greater.
>>> Just completed alignment, calibration and was tested. Works great. 
>>> Excellent except for a scratch on top left front. One special caveat; 
>>> the internal meter movement is defective and has been replaced by an 
>>> external metal encased 4 x 4 1/2in. (much easier to read too) fully 
>>> compatable meter with CAD designed scale, accurate to Heath specs.
>>> Asking $65 plus shipping. Original manual. Pic available.
>>> 73, Dick KF4NS St Petersburg, FL 33714 USA Keep The Glow!
>>>
>>> ______________________________________________________________ 
>>> Test-Equipment mailing list Home: 
>>> http://mailman.qth.net/mailman/listinfo/test-equipment Help: 
>>> http://mailman.qth.net/mmfaq.html Post: 
>>> mailto:Test-Equipment at mailman.qth.net 
>>
>> ______________________________________________________________
>> Test-Equipment mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/test-equipment
>> Help: http://mailman.qth.net/mmfaq.html
>> Post: mailto:Test-Equipment at mailman.qth.net
>>
> ______________________________________________________________
> Test-Equipment mailing list
> Home: http://mailman.qth.net/mailman/listinfo/test-equipment
> Help: http://mailman.qth.net/mmfaq.html
> Post: mailto:Test-Equipment at mailman.qth.net
> 

-- 
Mike Manes    mrmanes at gmail.com     Tel: 303-979-4899
"Things should be made as simple as possible, but not more so."
A. Einstein


More information about the Test-Equipment mailing list