[Test-Equipment] Wanted: Heathkit 407-714 panel meter forIM-5248or '58

[Larry Goodrich]

The answer to your query is right.  However, if you don't want to get that
brave, email me.  I know of a shop that specializes in meter repair.  I'll
get his name and address to you.  I've known him for 45 years or so, and he
is very good.  He did the meter repair and calibration for the QPL testing
that I did many years ago.  Larry W9HTK



>Return-Path: <test-equipment-bounces at mailman.qth.net>
>Delivered-To: w9htk at iquest.net
>X-Original-To: test-equipment at mailman.qth.net
>Delivered-To: test-equipment at mailman.qth.net
>From: "ab6mt" <ab6mt at sonic.net>
>To: <test-equipment at mailman.qth.net>
>References: <BAY107-DAV1760A24753E3C18C36F43BC6920 at phx.gbl>
>Subject: Re: [Test-Equipment] Wanted: Heathkit 407-714 panel meter for
>	IM-5248or '58
>Date: Sun, 18 Sep 2005 21:23:00 -0700
>Organization: ab6mt
>X-MSMail-Priority: Normal
>X-MIMEOLE: Produced By Microsoft MimeOLE V6.00.2800.1409
>X-BeenThere: test-equipment at mailman.qth.net
>X-Mailman-Version: 2.1.4
>Reply-To: ab6mt <ab6mt at sonic.net>
>List-Id: Discussion of Electronic Test Equipment
>	<test-equipment.mailman.qth.net>
>List-Unsubscribe: <http://mailman.qth.net/mailman/listinfo/test-equipment>,
>	<mailto:test-equipment-request at mailman.qth.net?subject=unsubscribe>
>List-Archive: <http://mailman.qth.net/pipermail/test-equipment>
>List-Post: <mailto:test-equipment at mailman.qth.net>
>List-Help: <mailto:test-equipment-request at mailman.qth.net?subject=help>
>List-Subscribe: <http://mailman.qth.net/mailman/listinfo/test-equipment>,
>	<mailto:test-equipment-request at mailman.qth.net?subject=subscribe>
>Sender: test-equipment-bounces at mailman.qth.net
>Errors-To: test-equipment-bounces at mailman.qth.net
>X-Spam-Status: Not Scanned {Agt.2.wh4TLxqsv.W4Fg91|1127103780}
>X-Virus-Status: Skipped - Not Subscribed 1
{Agt.2.wh4TLxqsv.W4Fg91|1127103780}
>
>If all that is wrong with you meter is that it binds, or will not zero, it
>is easily repairable.  It has small metallic particles in the meter
>movement.
>You can remove them by first cutting narrow slits of cellophane tape.  Using
>stainless steel tweasers, stick the tape down along side the moving parts of
>the meter.  The metal fragments will stick to the tape.  Change the tape
>frequently to avoid recontaminating the meter when you move the tape through
>the meter movement.
>
>
>----- Original Message ----- 
>From: DON CRAMER
>To: test-equipment at mailman.qth.net
>Sent: Sunday, September 18, 2005 8:58 PM
>Subject: [Test-Equipment] Wanted: Heathkit 407-714 panel meter for IM-5248or
>'58
>
>
>Looking for the analog panel meter used in the Heathkit IM-5248 and IM-5258
>distortion analyzers, Heath PN 407-714.  This has a 200uA, 1400 ohm, 100
>degree movement.  Cosmetics can be terrible, but movement should not bind
>and should be able to be zeroed with the mechanical tweak.
>
>Please contact me off list if you have one to sell, or know of one who does.
>Thank you.
>Don Cramer
>_______________________________________________
>Test-Equipment mailing list
>Test-Equipment at mailman.qth.net
>http://mailman.qth.net/mailman/listinfo/test-equipment
>
>_______________________________________________
>Test-Equipment mailing list
>Test-Equipment at mailman.qth.net
>http://mailman.qth.net/mailman/listinfo/test-equipment
>
>