[TenTec] KPA500 amp

[CW Carpenter]

Thanks for the response, Dave. But I have to disagree with you, the KPA500
will not follow band changes from the Omni....at least not according to the
Elecraft people I talked to before I bought the 500, and when I used it in
AL.

But my question was concerning the cabling from the Omni to the 500. I
thought I had hooked the two together as I had it before my move from AL to
TN. But I am not getting any power out of the 500. So was checking if any
others using this set up, KPA500 to the Omni 7.

Charlie K4SHA

On Wed, Jul 15, 2015 at 8:23 PM, H. Dave Meitzen <dmeitzen at tx.rr.com> wrote:

> The KPA will detect the transmit frequency (at the minimum) - nice amp!
> Dave AA9TT
>
> -----Original Message-----
> From: Tentec [mailto:tentec-bounces at mailman.qth.net] On Behalf Of CW
> Carpenter
> Sent: Wednesday, July 15, 2015 2:40 PM
> To: tentec at mailman.qth.net
> Subject: [TenTec] KPA500 amp
>
> Does anyone out there have an Omni 7 hooked up to an Elecraft KPA500????
> I'm not to sure on how to get these two together...not wanting to burn
> either one up on crossed wires!!
>
> Tnx for any help.
>
> Charlie K4SHA
> ______________________________________________________________
> Tentec mailing list
> Home: http://mailman.qth.net/mailman/listinfo/tentec
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Tentec at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
> ______________________________________________________________
> Tentec mailing list
> Home: http://mailman.qth.net/mailman/listinfo/tentec
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Tentec at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>