[TenTec] Digital modes with the OMNI VII

[Brian Carling]

I'm going to adapt my EASY-DIGI to connect to the 5-pin ACC connector on the OM 7.

Best regards - Bry Carling



> On Jul 14, 2014, at 8:48 PM, "Jim - N4ST" <newsgroup at jimpricejr.com> wrote:
> 
> Brian,
> I have ran the list of homebrew and kit interfaces with earlier rigs, but
> for my Omni VII I use a SignaLink USB.
> Plug 'n Play, so to speak.
> I have been very happy with this combination, working RTTY, PSK, JT-65,
> JT-9, FSK-441, ISCAT-B and several other digital modes that I have
> forgotten.
> 
> If you are trying to homebrew, page 16 of the manual shows the pin out for
> the ACC1 jack that you will want to use.
> Be sure and select LINE in the menu instead of MIC for digital operations,
> and turn off that speech processor.
> 
> ____
> 73,
> Jim - N4ST
> 
> 
> -----Original Message-----
> From: Tentec [mailto:tentec-bounces at mailman.qth.net] On Behalf Of
> bcarling at cfl.rr.com
> Sent: Monday, July 14, 2014 17:28
> To: tentec at mailman.qth.net
> Subject: [TenTec] Digital modes with the OMNI VII
> 
> Can someone give me some ideas on how you went about operating Digital modes
> with the OMNI VII?
> 
> I need to put together a sound card  interface for mine, and the information
> in the manual for that particular subject is rather limited...
> 
> 73 - Brian AF4K
> ______________________________________________________________
> Tentec mailing list
> Home: http://mailman.qth.net/mailman/listinfo/tentec
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Tentec at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>