[TenTec] Digital modes with the OMNI VII

[Paul Deyo]

I also have used a Signalink and worked FB with my Mac.  I DID NOT like the TenTec sound card cable.
-- 
Paul - N1PD
Sent with Airmail

On July 14, 2014 at 8:48:08 PM, Jim - N4ST (newsgroup at jimpricejr.com) wrote:

Brian,  
I have ran the list of homebrew and kit interfaces with earlier rigs, but  
for my Omni VII I use a SignaLink USB.  
Plug 'n Play, so to speak.  
I have been very happy with this combination, working RTTY, PSK, JT-65,  
JT-9, FSK-441, ISCAT-B and several other digital modes that I have  
forgotten.  

If you are trying to homebrew, page 16 of the manual shows the pin out for  
the ACC1 jack that you will want to use.  
Be sure and select LINE in the menu instead of MIC for digital operations,  
and turn off that speech processor.  

____  
73,  
Jim - N4ST  


-----Original Message-----  
From: Tentec [mailto:tentec-bounces at mailman.qth.net] On Behalf Of  
bcarling at cfl.rr.com  
Sent: Monday, July 14, 2014 17:28  
To: tentec at mailman.qth.net  
Subject: [TenTec] Digital modes with the OMNI VII  

Can someone give me some ideas on how you went about operating Digital modes  
with the OMNI VII?  

I need to put together a sound card interface for mine, and the information  
in the manual for that particular subject is rather limited...  

73 - Brian AF4K  
______________________________________________________________  
Tentec mailing list  
Home: http://mailman.qth.net/mailman/listinfo/tentec  
Help: http://mailman.qth.net/mmfaq.htm  
Post: mailto:Tentec at mailman.qth.net  

This list hosted by: http://www.qsl.net  
Please help support this email list: http://www.qsl.net/donate.html  

______________________________________________________________  
Tentec mailing list  
Home: http://mailman.qth.net/mailman/listinfo/tentec  
Help: http://mailman.qth.net/mmfaq.htm  
Post: mailto:Tentec at mailman.qth.net  

This list hosted by: http://www.qsl.net  
Please help support this email list: http://www.qsl.net/donate.html