[TenTec] Re: Tentec digest, Vol 1 #173 - 1 msg

Mon, 17 Mar 2003 14:34:11 -0600

I instastalled the #47s and an RCA cord from the back of the S Line to 
the Tentec and it looks great.  Easiest modification I ever did since 
the transmitter already had the RCA connector wired in for 6.3VAC and 
all I had to do was relabel the TenTec RCA connector to 6.3V from 12V. 
 Actually I used the RS  272-1115 (#1847) which is half the current of 
the #47 but otherwise the same.

Thanks for the push in the right direction.

Tom North wrote:

>The trusty old #47 should do the trick. RS 272-1110, or most auto supply
>houses.
>GL
>Tom
>
>
>Subject: [TenTec] 6 volt bulbs for TenTec 229
>Reply-To: [email protected]
>
>Does anyone know what bulbs would replace the 12 volt bulbs in the 229
>so that I could run the TenTec 229 from the 6.3 volts available in my
>S-Line.  There is no 12 volts available in the S-Line.
>
>
>
>--__--__--
>
>_______________________________________________
>Tentec mailing list
>[email protected]
>http://mailman.qth.net/mailman/listinfo/tentec
>
>
>End of Tentec Digest
>
>
>_______________________________________________
>Tentec mailing list
>[email protected]
>http://mailman.qth.net/mailman/listinfo/tentec
>
>  
>