[Swan] 508 problem

[yash at aol.com]

 Ken
 Thanks the print is much better than I had.
dale wt4t

 

 

-----Original Message-----
From: Ken Winterling <wa2lbi at gmail.com>
To: Discussion of equipment manufactured by Swan <swan at mailman.qth.net>
Sent: Thu, Mar 8, 2012 8:06 am
Subject: Re: [Swan] 508 problem


Dale,



Try this manual/schematic:

http://6mt.com/Swan%20508%20-%20Frequency%20Control%20Unit.zip



Ken

WA2LBI







On Wed, Mar 7, 2012 at 22:39, yash at aol.com <yash at aol.com> wrote:



>   I received the 508 vfo today,was a rat, now looking pretty good. I

> plugged the vfo into the 500cx and nothing but pilot lights worked , no

> audio ,just white noise. I took apart the 9 pin plug and found several

> wires broken and several grounds going no where. I looked in the compendium

> found the 508 and the 500cx should play together with no changes made to

> the vfo or the rig. I downloaded the schematic of the 508 but the quality

> is so poor its hard to make out any numbers to double check the plug. and

> relay wiring. Does anyone have a clean schematic of the 508 they could

> send. I just dont want to make any mistakes with the plug wiring with 200+

> volts getting put in the wrong place.

> thanks for any help

> dale wt4t

>

______________________________________________________________

Swan mailing list

Home: http://mailman.qth.net/mailman/listinfo/swan

Help: http://mailman.qth.net/mmfaq.htm

Post: mailto:Swan at mailman.qth.net



This list hosted by: http://www.qsl.net

Please help support this email list: http://www.qsl.net/donate.html