[Swan] 508 problem

[Ken Winterling]

Dale,

Try this manual/schematic:
http://6mt.com/Swan%20508%20-%20Frequency%20Control%20Unit.zip

Ken
WA2LBI



On Wed, Mar 7, 2012 at 22:39, yash at aol.com <yash at aol.com> wrote:

>   I received the 508 vfo today,was a rat, now looking pretty good. I
> plugged the vfo into the 500cx and nothing but pilot lights worked , no
> audio ,just white noise. I took apart the 9 pin plug and found several
> wires broken and several grounds going no where. I looked in the compendium
> found the 508 and the 500cx should play together with no changes made to
> the vfo or the rig. I downloaded the schematic of the 508 but the quality
> is so poor its hard to make out any numbers to double check the plug. and
> relay wiring. Does anyone have a clean schematic of the 508 they could
> send. I just dont want to make any mistakes with the plug wiring with 200+
> volts getting put in the wrong place.
> thanks for any help
> dale wt4t
>