[Swan] 500 CX Accessory Socket Jumper Wiring

[Steve Sutfin]

Hi Ron,
The accessory socket is the external VFO or the VFO selector switch. If 
you don't have that accessory then you need to have a jumpered plug in 
the socket or it won't work. The jumpered pins should be #3 to#4 and #1 
to #8. If you don't have the plug let me know, I have a couple of 
spares.
Steve k7dna

On Mar 4, 2009, at 7:26 AM, W6OM wrote:

>
> I recently picked up a 500CX from an estate. The manual pictures a male
> plug inserted into the accessory socket which appears to have some
> jumpers on it.
>
> The schematic shows nothing about anything being jumpered.  Anyone know
> about what is jumpered on the accessory socket to make the rig work
> properly?
>
> Cheers
>
> Ron  W6OM
>
>
>
>
>
>
> E-mail message checked by Spyware Doctor (5.5.1.322)
> Database version: 5.11890e
> http://www.pctools.com/en/spyware-doctor/
> ______________________________________________________________
> Swan mailing list
> Home: http://mailman.qth.net/mailman/listinfo/swan
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Swan at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>