[Swan] SWAN 350 power supply

[DUVA Jorge SIDERCROM]

OK Greg, i don't have Nestscape, when burn the transformer only the solution is buy a new power supply ?

73
Jorge
LU9EBZ 

-----Mensaje original-----
De: swan-bounces at mailman.qth.net [mailto:swan-bounces at mailman.qth.net] 
Enviado el: Jueves, 05 de Octubre de 2006 08:00 p.m.
Para: Discussion of equipment manufactured by Swan
Asunto: Re: [Swan] SWAN 350 power supply

Hi Jorge:
The schematic is in the 500CX manual at BAMA website.
You may have to use Netscape browser to see the pictures.
The transformer is hard to rewind because of the bias voltage tap on the HV winding.
73's
Greg
WA7LYO
in sunny Feenix
----- Original Message -----
From: "DUVA Jorge SIDERCROM" <JDUVA at terniumsiderar.com>
To: "Greg Mijal" <bluebirdtele at earthlink.net>; "Discussion of equipment manufactured by Swan" <swan at mailman.qth.net>
Sent: Thursday, October 05, 2006 3:30 PM
Subject: RE: [Swan] SWAN 350 power supply



Hello Greg, the question is because the transformer burn when a friend use it whit a SWAN 500cx :( , you have the power supply diagram for the SWAN 500cx ?
If you can make some photos of the internal part from the power supply pease send me to my e-mail I don't have six meters, im building a transverter.
I have a Kenwood ts450s too, but no six meters :(

73
Excuse any errors in my english.
Jorge D'Uva
LU9EBZ
San Nicolas
Argentina

-----Mensaje original-----
De: swan-bounces at mailman.qth.net [mailto:swan-bounces at mailman.qth.net]
Enviado el: Miércoles, 04 de Octubre de 2006 12:31 p.m.
Para: Discussion of equipment manufactured by Swan
Asunto: Re: [Swan] SWAN 350 power supply

Hello Jorge:
I don't have winding information but I do have a Swan 500cx 117xc I would 
like to sell. Works well, good output and has been run on the air recently.
With manual
I also have the speaker power supply for the Swan 350.  It's slightly lower 
capacity than the 117XC and only works correctly with the 350 transceiver. I 
did use it with a different transceiver by changing one of the bias supply 
resistors.
Do you work six meters? I have a Swan 250C / 117xc I would like to sell 
also.
If you are interested let me know and I will make some photos for you.
Have a good day
Greg
WA7LYO
in sunny Feenix
----- Original Message -----
From: "DUVA Jorge SIDERCROM" <JDUVA at terniumsiderar.com>
To: <swan at mailman.qth.net>
Sent: Wednesday, October 04, 2006 2:43 AM
Subject: [Swan] SWAN 350 power supply


Hello all: I have a problem, to my SWAN 350 burns the transformer of the 
power supply : ( , I need the data to rewind him, measures of the wire, 
quantity of turns, voltages, etc.
Any help will be welcome.
A question, is this source good for a SWAN 500cx ?
73
LU9EBZ
Jorge D'Uva
San Nicolas
Argentina
_______________________________________________
Swan mailing list
Swan at mailman.qth.net
http://mailman.qth.net/mailman/listinfo/swan

_______________________________________________
Swan mailing list
Swan at mailman.qth.net
http://mailman.qth.net/mailman/listinfo/swan
_______________________________________________
Swan mailing list
Swan at mailman.qth.net
http://mailman.qth.net/mailman/listinfo/swan 

_______________________________________________
Swan mailing list
Swan at mailman.qth.net
http://mailman.qth.net/mailman/listinfo/swan