[Standard] RE:C5608DA High Power on 2M Problem (Paul H. Dluehosh)

[David]

Sounds like some kind of thermal protection problem...

Might want to give Matt Adrian KD8ZB of SAR Technical Services Inc a
call,
He's at 1792 Nash Dr., St. Joseph, MI 49085 (269) 429-2334.
I understand he was a technician for Standard when there were here in
the US and doing amateur products.

David, KD4CLJ


>Bryce,
>The problem isn't fixed. It only transmits on low power. Any attempt to
>transmit on High power kicks the transmitter off the air after a second
or
>so. Further pushes of the PTT will not transmit. If the rig is turned
off >and
>then back on, it will transmit again for a second or so on high power
and
>then it quits again. It is not intermittent, it is very repeatable.

>I guess that no one has seen this exact problem so I will have to
continue
>the troubleshooting.

>Thanks, 73,
>Paul