[SMCARA] Crimpers

[Rene Ramirez]

I do as well but...

I would advise AGAINST using APP's in a mobile installation.  Why?  They
are not as positive locking as compared to other connector configurations
and in a mobile installation you have shock and vibration to deal with (Not
so at the shack/in the field).  If you feel you must go that route be very
sure that you...

1.  use super glue to adhere the two sides together  (do not use the roll
pins that come with them)
2.  Use one of the connector locks that you can get from west mountain
radio et.al. to keep both sides held together so they wont
shake/rattle/roll apart.

YMMV

Ren.

On Mon, May 11, 2015 at 3:00 PM, AWG9Tech <awg9tech at gmail.com> wrote:

> I plan to start a mobile install soon and was wondering if anyone had a set
> of Anderson Powerpole crimpers I could borrow...
>
> Thanks,
>
> Eddie
> KB3HAM
> ______________________________________________________________
> SMCARA mailing list
> Home: http://mailman.qth.net/mailman/listinfo/smcara
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:SMCARA at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to w3bnyren at gmail.com
>