[SMCARA] FW: [PVRC] Fwd: Items for sale

[Tom Shelton]

Please contact Steve (k4eu.steve at gmail.com) directly if interested.

Tom Shelton, ND3N

-----Original Message-----
From: PVRC [mailto:pvrc-bounces at mailman.qth.net] On Behalf Of Steve Hawley
Sent: Thursday, July 30, 2015 9:20 AM
To: PVRC <pvrc at mailman.qth.net>
Subject: [PVRC] Fwd: Items for sale

Hello folks;

I have the following items that need a new home - pick up at my QTH only:

-- Briggs and Stratton model 030246 portable generator;  5550 watts; on wheels; 5 gallon gas capacity; fuel on/off valve; included 25' Generator Adapter Cord Set will provide four each additional 120v, 20a outlets - total of eight possible.  Fired it up this morning for its quarterly test, original owner, light use, well maintained.  $500

-- 40' universal aluminum tower, pointed top section, was used for a homebrew two-element Quad (included).  $300

-- Rohn-25 pointed top section.  $50

-- 25' metal push-up pole with guy brackets, 1 1/8" diameter at the top.
$20

-- 3-element 10m Yagi, Telex/Hy-Gain model 103BA-S monobander.  $130

-- 2-element Cubical Quad kit - New - Never Built - All Hardware - Original Box - Original Instruction Manual - Pre-cut Essex MR-200 14AWG wires for each band; 5-bands 20-10m; purchased from Antenna Mart/Max Gain Systems; Model AMQ-2-5-8 heavy duty; 8 Fiberglass spreaders: 8 ft. length of 1¼" OD and one 8 ft. length of 1" OD round fiberglass tube both having 0.125"
wall. The 1" tube snugly-but-easily telescopes in-side the larger tube.
Using a recommended 12" overlap yields a usable length of 15 feet...more than enough for 20M. A foot of this extra length may be easily cut (with a
hacksaw) from the 1" OD tube, and epoxied inside the bottom of the 1¼" OD tube. This yields a full ¼" wall thickness at the point of greatest stress...e.g. where the clamps secure the spreaders to the spreader mounting plate or "spider." $600

73.....//Steve K4EU

k4eu.steve at gmail.com
k4eu at arrl.net
______________________________________________________________
PVRC mailing list
Home: http://mailman.qth.net/mailman/listinfo/pvrc
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:PVRC at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html