[SixClub] Recommended Coax?

[kd4e]

So if 9913 and LMR-400 are discouraged - due to maintenance
concerns - then it is either Davis RF Bury-Flex or some form
of hardline on 6m and 2/440?

HF is much more tolerant of line-losses so I will use my
older RG-8U and RG-8x coax there.

Still have not decided how I will get the 450 Ohm slotted
line for my HF dipole into the steel house ... hmmm.

> Basically you can not prevent the coax, any coax, from
> breathing unless it is solid such as direct bury cables,
> or pressurized air core. The last coax I had contaminated
> was LMR-400 and that was due to water getting into the
> power dividers.  Even though we consider N-type 
> connectors water proof, the water went *through* both the
> female connector on the divider and the male connector on
> the coax.  The connectors were thoroughly sealed on the
> outside. 73, Roger (K8RI)

-- 

.Thanks! & 73, doc, KD4E
.Have an http://ultrafidian.com day!
.
.         |_|___|_|
.         | | & | |
.            {|
.     /\     {|
.    /  \    {|
.   / @  \   {|
.   | |~_|~~~~|
.   | -| |    |
.=================== http://kd4e.com
.Free OS : http://www.PuppyLinux.com
.Google Street View logs WiFi networks & Mac addresses
.Use http://Startpage.com instead - they respect privacy