[SixClub] Converting a 11M Beam to 6M

[kd4e]

> Doc .. I have about 3-4 of those critters in my aluminum pile ..    forget 
> about "converting" .. just look at the components for what they are, and 
> build yourself a nice 3L using them for whatever the plans call for ... 
> pretty easy, you may want to use a modeling program, and measure all the 
> element parts, etc. .. however, if you slide up and down the Magic Band, as 
> I do, that may not be too important .... aim for your most popular fq and 
> have fun!  73, awaiting the arrival of my newly purchased 6M amp, pair of 
> 3-500Z -- whee!   Hiya neighbors!  Now, if the Alpha 87A I am running on HF 
> would only go up that high, but the KW out of the single bander shall have 
> to do .. HIHI    73!
> Mark Nelson  -  AA6DX

Am still tweaking my Knight TR-106.  Found a second
12-pin connector at the Fest this morning so I will
have both an AC and a DC cable.

Have located a second V-107 VFO so I can add a dual
tube buffer which I may modulate for DSB.

Were I to find a third V-107 I'd mod that for FM!

Also found a matching amp.  It reportedly has a problem --
it "blows fuses with the tubes in it".  It, of course,
does not do so when the current owner pulls the tubes.
Anyone seen this before and have a suggested cure?

Am still looking for a matching blue Knight microphone.

-- 

Thanks! & 73,
doc, KD4E
... somewhere in FL
URL:  bibleseven (dot) com