[SixClub] Converting a 11M Beam to 6M

[AA6DX - Mark]

Doc .. I have about 3-4 of those critters in my aluminum pile ..    forget 
about "converting" .. just look at the components for what they are, and 
build yourself a nice 3L using them for whatever the plans call for ... 
pretty easy, you may want to use a modeling program, and measure all the 
element parts, etc. .. however, if you slide up and down the Magic Band, as 
I do, that may not be too important .... aim for your most popular fq and 
have fun!  73, awaiting the arrival of my newly purchased 6M amp, pair of 
3-500Z -- whee!   Hiya neighbors!  Now, if the Alpha 87A I am running on HF 
would only go up that high, but the KW out of the single bander shall have 
to do .. HIHI    73!

Mark Nelson  -  AA6DX

mailto: AA6DX at ARRL.NET

----- Original Message ----- 
From: "kd4e" <kd4e at verizon.net>
To: "World Wide Six Meter Club" <sixclub at mailman.qth.net>
Sent: Thursday, August 24, 2006 6:15 PM
Subject: [SixClub] Converting a 11M Beam to 6M


I have been given a 3-element 11M beam with rotator.

Anyone converted one of these to 6M?

Any gotcha's and/or recommendations?

-- 

Thanks! & 73,
doc, KD4E
... somewhere in FL
URL:  bibleseven (dot) com
______________________________________________________________
SixClub mailing list
Home: http://mailman.qth.net/mailman/listinfo/sixclub
Help: http://mailman.qth.net/faq.htm
Post: mailto:SixClub at mailman.qth.net


-- 
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.1.405 / Virus Database: 268.11.5/426 - Release Date: 8/23/2006