[SixClub] wiring the shack

[Gary - N3JPU]

Actually I am doing the same for my shack which was torn down in our big
renovation project (complete demolition of one section of our house and a
complete rebuild with new basement). Shack will be on the fist floor in a
nice 18x30' room.

Never had problems with AC wiring noise in the house.

But some things I am doing for the shack while the studs are open.

1) AC outlets (as well as extra amounts) behind the radio positions will be
on their own dedicated/non-shared breakers.
2) 220V outlet
3) Large conduits in the wall to pull the hardline through. Will just be 1/2
hardline to the lightning arrestors on the Single Point Ground.
4) Conduit pull for the heavy ground wire to the Single Point Ground system
5) Conduit pulls and outlet boxes for network connections.

Gary Mitchelson
N3JPU Montgomery Co. MD  FM19
USAF MARS and SHARES: AFA1PU/AFF1MD/AFF1M 
http://www.mitchelson.org/ 

-----Original Message-----
From: sixclub-bounces at mailman.qth.net
[mailto:sixclub-bounces at mailman.qth.net] On Behalf Of Tom Peters
Sent: Saturday, April 22, 2006 11:52
To: sixclub at mailman.qth.net
Subject: [SixClub] wiring the shack


I could use BX, which is armored semi-flexible cable, but I can't determine 
right at this moment if the code allows that.

thx es 73 de N9QQB