[SixClub] rig grounding

Thu, 19 Feb 2004 19:35:06 -0500

Ground each individually to a grounding bar. It's not necessary to run a
'home run' for each radio.  Just don't ground together.  Make the path to
ground as short and straight as possible.  73 BOB  KG4YOU
----- Original Message ----- 
From: "Dennis Kaylor" <[email protected]>
To: <[email protected]>; <[email protected]>
Sent: Thursday, February 19, 2004 2:26 PM
Subject: [SixClub] rig grounding


> hey guys
> i have an Icom 756Pro and an Icom 910H i have the Pro with a short wire
> running to a 4 foot ground rod which is connected to an 8 footer about
> 10 feet away which is also connected to a 2 1/4in diam pipe that was
> drone into the ground by a DSS installer so i dont know how deep it goes
> but my question is
> can i run a short ground wire from the 910H to the Pro which is grounded
> or should it be run directly to the grounding rod its self?
> and is the above ground acceptable ?
> thanks
>
>
> --- StripMime Report -- processed MIME parts ---
> multipart/alternative
>   text/plain (text body -- kept)
>   text/html
> The reason this message is shown is because the post was in HTML
> or had an attachment.  Attachments are not allowed.  To learn how
> to post in Plain-Text go to: http://www.expita.com/nomime.html  ---
> ______________________________________________________________
> SixClub mailing list
> Home: http://mailman.qth.net/mailman/listinfo/sixclub
> Help: http://mailman.qth.net/faq.htm
> Post: mailto:[email protected]
>