[Scan-DC] Problem with Arlington County P25 system on Uniden 346XT

[Doug Kitchener]

There's a setting in (at least some of) the BuTel software packages that pertains to rounding... I'll see if I can find it and post; went through that sometime back.

Andy, is it possible that Arlington is fooling around with the control channel - i.e. using different frequencies on occasion for whatever reason?  I ran into that somewhere along the line also, can't remember when or what system it was...

Hope this helps... Happy Thanksgiving (yes, not yet, but if they can put out the Xmas stuff...  :)

Regards,

Doug




----- Original Message -----
> From: Alan Henney <alan at henney.com>
> To: Andrew Clegg <andrew_w_clegg at hotmail.com>; Scan DC <Scan-DC at mailman.qth.net>
> Cc: 
> Sent: Sunday, November 24, 2013 12:06 AM
> Subject: [Scan-DC] Problem with Arlington County P25 system on Uniden 346XT
> 
> 
> Hi Andrew!
> 
> Curious if you had also tried programming the control channels in your radio 
> in conventional mode?  Then when the trunked signal disappears, try to 
> monitor the audio quality?
> 
> Does the problem involve just one of the control channels?  I have chronic 
> problems with my BCD396XT and the Butel software rounding off my freqs. 
> Reading the radio back into the computer, does it look ok?  Are all four 
> entered as trunked channels?
> 
> 860.4375
> 859.9375
> 859.7625
> 859.4375
> 
> Alan 
> 
> ______________________________________________________________
> Scan-DC mailing list
> Home: http://mailman.qth.net/mailman/listinfo/scan-dc
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Scan-DC at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>