[Scan-DC] Other alternatives - RE: Programming Cable for 296D

Andrew Clegg w4jecom at w4je.com
Thu Dec 16 11:42:50 EST 2010


Based on the directions to physically chop off the USB connector and replace with a serial connector, this is not the same thing as using a USB to serial adapter. The former is purely mechanical, the latter actually involves translating the USB protocol to the serial protocol. Bottom line is I don't think using a USB-to-serial adapter would work. Instead, you must do the mechanical replacement of the USB connector with a serial connector. 

On Dec 16, 2010, at 11:30, "Rick Hansen" <Rick.Hansen at apsglobal.com> wrote:

> Hi Doug,
> 
> It looks like the cable is easy to build. Here's instructions on doing it. 
> 
> 
> http://pinouts.ru/DevicesCables/uniden_bc296d_pinout.shtml
> 
> I was a little worried about going to a Russian site, but it checked out OK.
> 
> The gist is below.
> 
> The site lists over 50 cameras that have compatible cables. You'll need to
> get a Serial-to-USB convertor, and those are inexpensive on ebay. 
> 
> Good luck and may your holidays be great - R. 
> 
> ====
> 
> 
> The connector that plugs into these scanners is the same as that used by
> devices from Casio, Fuji, Konica Minolta and Toshiba. A list of devices that
> use this connector can be found below. Cables for these devices can be found
> very inexpensively and can then be modified for use with Uniden scanners.
> 
> The cable for those devices have a USB connector at the other end that you
> will have to remove and replace with a 9-pin D-Sub female. DO NOT use the
> cable to connect your scanner to the USB port of your PC. You will damage
> your scanner and possibly your PC. You MUST replace the USB connector on the
> cable with a serial connector. Once you replace the USB connector with a
> serial connector, DO NOT use the cable to connect devices other than your
> Uniden scanner.
> 
> The 4-pin connector is mounted vertically on the scanner and the pins are
> numbered from the top of the scanner (where the antenna is) down to the
> bottom.
> 
> Uniden    D-Sub    Description
> Pin    Assignment    Pin    Assignment
> 1    TXD    2    RXD    Data transfer from scanner to PC
> 2    CTS    8    CTS    Clear to send
> 3    RXD    3    TXD    Data transfer from PC to scanner
> 4    GND    5    GND    Ground
> 
> 
> he connector that plugs into these scanners is the same as that used by
> devices from Casio, Fuji, Konica Minolta and Toshiba. A list of devices that
> use this connector can be found below. Cables for these devices can be found
> very inexpensively and can then be modified for use with Uniden scanners.
> 
> The cable for those devices have a USB connector at the other end that you
> will have to remove and replace with a 9-pin D-Sub female. DO NOT use the
> cable to connect your scanner to the USB port of your PC. You will damage
> your scanner and possibly your PC. You MUST replace the USB connector on the
> cable with a serial connector. Once you replace the USB connector with a
> serial connector, DO NOT use the cable to connect devices other than your
> Uniden scanner.
> 
> The 4-pin connector is mounted vertically on the scanner and the pins are
> numbered from the top of the scanner (where the antenna is) down to the
> bottom.
> 
> 
> 
> 
> Uniden    D-Sub    Description
> Pin    Assignment    Pin    Assignment
> 1    TXD    2    RXD    Data transfer from scanner to PC
> 2    CTS    8    CTS    Clear to send
> 3    RXD    3    TXD    Data transfer from PC to scanner
> 4    GND    5    GND    Ground
> 
> 
> ______________________________________________________________
>> Scan-DC mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/scan-dc
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Scan-DC at mailman.qth.net
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> ______________________________________________________________
>> Scan-DC mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/scan-dc
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Scan-DC at mailman.qth.net
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>                         
> ______________________________________________________________
> Scan-DC mailing list
> Home: http://mailman.qth.net/mailman/listinfo/scan-dc
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Scan-DC at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> 
> ______________________________________________________________
> Scan-DC mailing list
> Home: http://mailman.qth.net/mailman/listinfo/scan-dc
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Scan-DC at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html


More information about the Scan-DC mailing list