[Scan-DC] 225.0 as CLAW preset
Jeffery R. Smith
[email protected]
Thu, 27 Feb 2003 15:38:06 -0500
Bill, I am not a Ham so I could not say. But, I have always been told =
that
that the
MILAIR band starts at 225 so that's what I have gone by. The reason I =
found
this
freq is that I have a BC780 searching 225Mhz - 275Mhz. It found this =
freq so
I
transferred the freq over to a Pro-2035 which scans and records all =
audio. I
had an
audio recording of the Claws using this freq.
Take it easy,
Jeff=20
>=20
> > -----Original Message-----
> > From: William D. Rossiter III [mailto:[email protected]]
> > Sent: Thursday, February 27, 2003 3:30 PM
> > To: 'Jeffery R. Smith'; Scan-DC (E-mail)
> > Subject: RE: [Scan-DC] 225.0 as CLAW preset
> >
> > Isn't 225.000 an amateur frequency belonging to the 1.25 meter band?
> >
> > -Bill (KB3ITA)
> >
> > -----Original Message-----
> > From: [email protected]
> > [mailto:[email protected]]On Behalf Of Jeffery R. Smith
> > Sent: Thursday, February 27, 2003 3:20 PM
> > To: Scan-DC
> > Subject: [Scan-DC] 225.0 as CLAW preset
> >
> >
> > I posted this on MILCOM and thought I had better put out here as =
well.
> >
> > A couple nights ago I caught CLAW on 225.0. They did not stay there =
long
but
> > were defiantly using as A-A for a moment. I think they were doing =
Ops
Checks
> > and stayed on that one for a few seconds.
> >
> > I figured I would put this out as I had not seen any discussion on =
this
one.
> >
> > Jeff Smith
> >
> > SOUTHERN MARYLAND SCANNER FORUM
> > =
http://groups.yahoo.com/group/SouthernMDScannerForum/?yguid=3D120176783
> >
> > In Use:
> > PRO-26, PRO-94, PRO-94(A), PRO-92
> > ICOM PCR 1000 & PRO-2035 W/OS535-CONTROLLED VIA SPECTRUM
> > EXPLORER
> > BC780XLT-CONTROLLED VIA TrunkStar 780
> > BC250-SOON TO BE CONTROLLED BY "TrunkStar785"
> > SIGNAL INTELLIGENCE - http://www.scanstar.com/
> > Yahoo Messenger ID- j333-76484
> >
> >
> > _______________________________________________
> > Scan-DC mailing list
> > [email protected]
> > http://mailman.qth.net/mailman/listinfo/scan-dc