[SADXA] What's Wrong With This Picture ?

[Jim English]

Actually I really don't see anything wrong with this picture other than the
fact that the girl must have dyed her hair dark because clearly BLONDE must
have been her original color!!  Now if you are a blonde woman I apologize
for the obvious slur.  But I must admit my first thought was that a normal
person will hold a soldering iron like that only once!  But then I read all
the other responses and couldn't resist.

Jim wo7v

On Thu, Jul 28, 2016 at 1:38 AM, k7bhm <k7bhm at cox.net> wrote:

> OK!  OK!  You guys haven't been in the Electronics Assembly Industry!!!!
> I was an instructor for Naval Weapons Center Soldering
> Spec. WS6536 for over 10 years:
>
>    1. No ESD Wrist Strap
>    2. No ESD protective pad connected to Gnd
>    3  PC Board is up-side-down; no solder pads on the component side.
>    4  Shell burn the hell out of her fingers when the iron is plugged in.
>    5  No proper working tools present.
>    6  No solder wick if she's doing any re-work
>    7  No fume/vent hood noted
>    8  No solder for reworking
>    9  No finger cots or nylon gloves for contamination control due to
> finger oils
>    10  Lipstick and make-up in a "Clean room" environment: NEVER!!
>    11  No Lab-Coat or smock to prevent further contamination.
>    12  No hair net
>    13  Solder tip is too small for intended work.
>    14  She obviously did NOT pass the required test for solder
> certification.
>    BUT........................Can she copy 20 WPM??????????
>
>    Thanks for the memories......Bob - K7BHM
>
> -----Original Message----- From: pinkfoster via SADXA
> Sent: Wednesday, July 27, 2016 10:44 PM
> To: Southern AZ DX Association E-Mail Reflector
> Cc: pinkfoster
> Subject: Re: [SADXA] What's Wrong With This Picture ?
>
> Where is the solder???
>
> Pink, K7ILA
>
> On Jul 27, 2016, at 9:05 PM, Jim KF7E <jim_kf7e at cox.net> wrote:
>>
>>    Hey Dick, we're looking at this backwards: there is nothing wrong with
>> this photo, it is an expose!
>>
>>    This is the tech responsible for making cold solder joints at her
>> company!
>>
>>    At last, proof! Many companies employ people like this, but now you
>> know the real reason behind all those signs posting: 'no cameras
>> allowed"...........
>>
>> KF7E
>>
>>
>> On 7/28/2016 1:05 AM, Richard Solomon wrote:
>>>
>>> http://i0.wp.com/makezine.com/wp-content/uploads/2016/03/stock-photo-beautiful-woman-repair-soldering-a-printed-circuit-board-204001492.jpg
>>> ______________________________________________________________
>>> SADXA Website http://www.sadxa.org
>>>
>>> SADXA mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/sadxa
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:SADXA at mailman.qth.net
>>>
>>> This list hosted by: http://www.qsl.net
>>> You can support qsl.net: http://www.qsl.net/donate.html
>>>
>>>
>> ______________________________________________________________
>> SADXA Website http://www.sadxa.org
>>
>> SADXA mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/sadxa
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:SADXA at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> You can support qsl.net: http://www.qsl.net/donate.html
>>
>
> ______________________________________________________________
> SADXA Website http://www.sadxa.org
>
> SADXA mailing list
> Home: http://mailman.qth.net/mailman/listinfo/sadxa
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:SADXA at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> You can support qsl.net: http://www.qsl.net/donate.html
> ______________________________________________________________
> SADXA Website http://www.sadxa.org
>
> SADXA mailing list
> Home: http://mailman.qth.net/mailman/listinfo/sadxa
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:SADXA at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> You can support qsl.net: http://www.qsl.net/donate.html
>