[RVRC] Status of the system

[E Drew Moore]

Paul,

Thanks for getting he excellent status report. Warren is one of the best installers in the area. Also Cully's call is N3HTZ. 

Thanks to all members and non-members that made the job a success. 

73, Drew, W2OU

*IPhone-forgive Typos*

On Nov 5, 2016, at 11:15 PM, Paul Nannery <kc2vrj at gmail.com> wrote:

Members,

Today we had a tower climb to start fixing the issues that have arisen on
the tower. we also had a small work party to get the system up and running
and tie up some lose ends from the move.


    First the climb,
We now have all antennas on the tower showing a near flat SWR. we replaced
connectors as well as cut some bad hard line out. we took some time to
chose a tower climber this time around and i am glad we did. we used warren
out of east Brunswick and his crew. they showed up at 8 am and by 815 we
had to men on the tower working to figure out what was going on. it turns
out the last climber was sub par and had lose connectors and poor weather
proofing allowing water in some of the hard line and also kinked some spots
pulling the hard line up.  this was all fixed and the arm was placed on the
440 its arm this was done first due to the fact the hard line was pinched
in the antenna mount and the antenna had to be loosed to fix that issue.
the 2M antenna is still on the tower leg and will require a 2ed climb it
took all of 10 hours on the tower today to trouble shoot and  fix all the
issues. we also had Cully from the PWA   on the ground sweeping all the
lines every time they were touched to make sure they were clean and this
was proven to be needed as the 440 connector was acting up and had to be
reterminated

on the ground
the 440 repeater was hooked up with all new jumpers the 2M amp had new fans
installed and will be in service soon just waiting on a few more parts to
protect it from any issues. the 900 repeater was hooked up and the new
computer was installed and the temporary one removed


Current status

2M up and running at mid power aprx. 20 W

440 up and running mid power A[rox 20 W on DMR Fusion and P25 some
adjustments are still being made.  DMR is on brandmister network for those
interested.

900 up and running connected to 27200

a big thank you to all who took the time to make this happen it may not
sound like a lot but it was a long day and a lot of work done

Wb0yle Bryan
Sorry i dont know the call Cully From PWA
AC2FE criag
KD2DUK Anna
K2AGE Dave
KB2EAR Scott with remote support helping with system migration
and the gentlemen who was with dave i am sorry i missed your name and call

please be patient is something is not perfect on the linking and web
control end email us and we will look in to any issues as far as the RF
side we should be much better off

Thank you
Paul Nannery
Kc2VRJ
______________________________________________________________
RVRC mailing list
Home: http://mailman.qth.net/mailman/listinfo/rvrc
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:RVRC at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html