[R-390] Squeaky Slugs

[Barry]

Yes. I had to take a second look before I realized those plates don’t exist in the R-390. 

Thanks,
Barry - N4BUQ

> On Sep 13, 2024, at 1:11 PM, Jim Whartenby via R-390 <r-390 at mailman.qth.net> wrote:
> 
> So it is; lots of lessons learned in the redesign that makes the A a different radio.Jim
> Logic: Method used to arrive at the wrong conclusion, with confidence.  Murphy 
> 
>    On Friday, September 13, 2024 at 12:28:56 PM CDT, Jacques Fortin <jacques.f at videotron.ca> wrote:   
> 
> Jim, wrong advice: it is a R-390, not a R-390A.
> See the attached picture of the R-390 slug racks.
> 
> 73, Jacques, VE2JFE in Montreal
> 
> BarryAre you sure that it is the slug?  Could it be the nearby roller is in need of a little, by that I mean tiny, spot of lubrication? It should not hurt anything to adjust the frequency so that the slug rack is in it's lowest position, loosen the two spline screws associated with the slug and allow the it to center itself in the tube and then tighten the spline screws.  This is part of my routine slug rack maintenance.JimLogic: Method used to arrive at the wrong conclusion, with confidence.  Murphy 
> 
> ______________________________________________________________
> R-390 mailing list
> Home: http://mailman.qth.net/mailman/listinfo/r-390
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:R-390 at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html