[R-390] bracket

[Larry H]

My apologies, I am wrong about the phillips screwdriver size.  It's a #2,
not 1.  I know why I went down that path - I tried many #2 phillips on the
left rear RF deck green hold down screw, and the shafts were all too big
in diameter.  The maximum shaft diameter that will work is 5/32".  I
couldn't find a #2 with a 6" long by 5/32" diameter shaft, so got a #1 and
very carefully use it.

Also, the Bristol spline wrench is specified as 7 3/4" long in the parts
list.  Although the 3 1/4" one I use works fine, the longer one would be
easier to use in some cases.

Sorry for the confusion.

Regards, Larry

On Sun, Jul 11, 2021 at 7:46 PM Larry H <larry41gm at gmail.com> wrote:

> Hi Kevin,   The Phillips head screwdriver is a #1 and 6" long shaft.    I
> got a nice one at Lowe's for a reasonable price.  Don't settle for a
> cheaply made one..
>
> The spline wrench is a .096 inch diameter, 6 spline by 3 inches long, L
> shaped.  Kits are easy to find with it in there, but you can also find them
> individually.
>
> The mounting bracket on the back of the rx is not usually found
> separately.  They are a part of the back panel.
>
> Regards, Larry
>
> On Sun, Jul 11, 2021 at 1:39 PM Kevin Page <kf4znl at live.com> wrote:
>
>> Looking for the fluted socket wrench, screwdriver and mount that holds
>> them to the panel of my 390a receiver. Thanks for any guidance
>>
>> Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for
>> Windows 10
>>
>> ______________________________________________________________
>> R-390 mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/r-390
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:R-390 at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>>
>