[R-390] R-390 Mechanical Alignment

[comcents]

is the original question / issue resolved?

I believe my manual is R390 A/ 391(A) is from 1953 and may have the 
answer(s)

I rebuilt my 391 in early to mid 70's from that manual, but I don't 
claim to remember much about it now. I had an advantage we do not have 
anymore (Randy was handy if I had a question)


Sherry G

On 2/22/2021 7:29 PM, thoyer via R-390 wrote:
> Cecil,
>
> You are correct, it is my typing that is bad - not enough zeros (same could
> be said for my paycheck!)
>
> Just finished going through the mech alignment at 02 000. Someone was in
> there before as two of the
> Bristol head screws were fairly stripped. I was able to get them out and
> found some replacements in one of my spare parts boxes.
>
> Onward and upward!
>
> ______________________________________________________________
> R-390 mailing list
> Home: http://mailman.qth.net/mailman/listinfo/r-390
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:R-390 at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html