[R-390] R-390A DB on c/l meter and S signal levels

[Larry H]

I know the chart did not get distributed by the list service machine, so
here's a link to the 3 parts of it:

https://imgur.com/a/VChW71g

If you'd like the .pdf for it, let me know.

Regards, Larry

------------------------------------------------------------------------------------------------------------------------------------------------------------------
> On Sat, Apr 6, 2019 at 8:55 PM Larry H <larry41gm at gmail.com> wrote:
>
>> Jose,  I found this chart I made up about the relation of S signal levels
>> to db.  It's attached.  Note the difference between the kwm2 and the R-390A.
>>
>> Regards, Larry
>>
>> On Sat, Apr 6, 2019 at 5:47 PM Larry H <larry41gm at gmail.com> wrote:
>>
>>> Hi Jose,  Welcome to the R-390x forum.  Your English is very good.  Hope
>>> you are enjoying your R-390A.
>>>
>>> Yes, the S9 equivalent is 34 db and each additional db on the S scale is
>>> an additional db on the R-390x scale, so you have it right (S9+10 would be
>>> 44, etc.).
>>>
>>> Regards, Larry
>>>
>>>
>>> -----------------------------------------------------------------------------------------------------------------------
>>> On Sat, Apr 6, 2019 at 3:54 PM jm <josemic at gmail.com> wrote:
>>>
>>>> Hi everybody. This is my first post and it is about the carrier meter.
>>>> Has somebody made a scale with the equivalent values in terms of S
>>>> based in
>>>> the carrier meter 0-100 indications?
>>>> I am confused. In some threads of the reflector it is mentioned that S9
>>>> corresponds to a reading of 34  in the scale. But, is it correct that
>>>> S9+10 would be 44 and so on?
>>>> I read every issue and I am very impressed with the technical level.
>>>>
>>>> Sorry for my poor English.
>>>> Jose
>>>> EA8DCP
>>>>
>>>>
>>>>