[R-390] Gear clamps

Barry n4buq at knology.net
Thu Oct 12 10:24:35 EDT 2017


If you have a drill press, it's not too terribly difficult to make a two-piece clamp similar to that but out of flat aluminum stock of sufficient thickness.  Two pieces drilled and tapped correctly and then clamped together with a small spacer (using the screws you'd use to clamp it to the gear), then drilled (and reamed if you have the right reamer) to the correct size works fine.  I had an R390A with such a clamp (I didn't make it but it didn't look that hard to make).

Thanks,
Barry - N4BUQ

----- Original Message -----
> From: "Stan Gammons" <s_gammons at charter.net>
> To: r-390 at mailman.qth.net
> Sent: Thursday, October 12, 2017 8:55:58 AM
> Subject: Re: [R-390] Gear clamps
> 
> A list member contacted me off list to say he used a split clamp from
> Fastenal for the gear clamp.  I'm not 100 percent certain, but I believe
> this is what he was referring to. No, it's not original, but it looks like
> it will work if one drills the hole to the correct diameter.
> 
> https://www.fastenal.com/products/details/4142507?term=Sp-4-a
> 
> 
> 73
> 
> Stan
> KM4HQE
> 
> 
> On October 10, 2017 7:14:13 PM CDT, Stan Gammons <s_gammons at charter.net>
> wrote:
> >Hi Everyone,
> >
> >I have all of the paper caps swapped in the R-390A I'm working on. Now
> >I've started working on the RF deck. I knew it had 1 broken gear clamp
> >before I started. After I started tearing the gear train apart to
> >replace the clamp, I found another broken clamp.  Does anyone have any
> >of the larger size, approx 25/64" diameter hole, clamps you would be
> >willing to sell?  I need at least 2 clamps.
> >
> >Thanks
> >
> >
> >73
> >
> >Stan
> >KM4HQE
> >
> >______________________________________________________________
> >R-390 mailing list
> >Home: http://mailman.qth.net/mailman/listinfo/r-390
> >Help: http://mailman.qth.net/mmfaq.htm
> >Post: mailto:R-390 at mailman.qth.net
> >
> >This list hosted by: http://www.qsl.net
> >Please help support this email list: http://www.qsl.net/donate.html
> ______________________________________________________________
> R-390 mailing list
> Home: http://mailman.qth.net/mailman/listinfo/r-390
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:R-390 at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> 


More information about the R-390 mailing list