[R-390] R-390A PTO ground strap screw

[David C. Hallam]

I have learned to do as watch makers do.  When disassembling small items 
with tiny bits and pieces, do in a tray with a rubber mat.  I am still 
looking for a small plastic gear from a Johnson Invader VFO that fell 
from the bench to the floor several years ago.  My work bench is raised 
about 3" above the floor.  Even with a rubber mat on the floor, parts 
always roll under the bench.

Watch makers often worked at  desk with a lined drawer.  Watches were 
disassembled in the drawer.

David
KW4DH

On 7/17/2012 1:42 PM, Bob Young wrote:
> I took the ground strap off that touches the shaft to clean it and dropped one of the little screws and lock washers onto the floor to be found in maybe a few years. Does anyone have a junker PTO hanging around with these screws on it? I only need the one screw but would take the whole PTO if need be. The PTO is working well with only one screw but I really want it to stay that way, thanks,
>
> Bob Young
> KB1OKL
>   		 	   		
> ______________________________________________________________
> R-390 mailing list
> Home: http://mailman.qth.net/mailman/listinfo/r-390
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:R-390 at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>

-- 
A democratic government is the only one in which those who vote for a tax can escape the obligation to pay it.
Alexis de Tocqueville