[R-390] WANTED ...

[ka9egw at britewerkz.com]

Lacking a lathe or dial indicator, rolling the shaft on a piece of plate
glass will readily reveal any remaining out-of-true...

I have access to a complete machine shop, contact offlist if need.
73, Brian ka9egw [at] britewerkz [dot] com

> Pete,
>  
> Been there, done that.  Some years ago had the same thing and was able to
> straighten the shaft.  A friend has a lathe and using a dial indicator to
> find the high/low spots we then clamped  the shaft in a vice and used a
> long handle somthing to apply the needed corrections.  A little at a time
> and you may be able to bring it back.
>  
> Is the RF deck for a R-390 or R-390A?
>  
> 73
> Roger
> KC8OPP
>
>
> --- On Thu, 9/22/11, Pete Williams <jupete at internode.on.net> wrote:
>
>
> From: Pete Williams <jupete at internode.on.net>
> Subject: [R-390] WANTED ...
> To: r-390 at mailman.qth.net
> Date: Thursday, September 22, 2011, 7:39 AM
>
>
>
>
> 'evening all..... anyone got a MHz shaft from the  gear box they can spare
> ?
> I just got  RF module ex USPs but the shaft poked thru' the  box  and  got
> badly bent.
> The usual compensations  apply.
> Thanks
> Pete VK3IZ 
>
> ______________________________________________________________
> R-390 mailing list
> Home: http://mailman.qth.net/mailman/listinfo/r-390
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:R-390 at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> ______________________________________________________________
> R-390 mailing list
> Home: http://mailman.qth.net/mailman/listinfo/r-390
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:R-390 at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>