[R-390] D. Hard Core RF Module Cleaning

[Flowertime01 at wmconnect.com]

D. Hard Core RF Module Cleaning
___ 01 Disassemble the gear train
___ 02 When you take the split gears apart, tie them together
___ 03 Maintain the orientation that they were originally assembled with
___ 04 Except for the counter toss all of the parts in a coffee can
___ 05 Add favorite degreaser and let brew
___ 06 Work penetrating oil into the bearings of the camshafts
___ 07 Keep lubing and wiping them until only clean oil comes out
___ 08 Now bath the RF deck in soap and water (dish washer)
___ 09 Now bath the Gear parts in soap and water (dish washer)
___ 10 Dry the RF deck and gears (all day in the sun light)
___ 11 Use 10W30 Mobil 1 synthetic oil for the RF deck
___ 12 Use Pennzoil wheel bearing grease on the detent
___ 13 Use compressed air to work oil into the bearings of the camshafts
___ 14 Lubricate each part of gear train prior to assembly
___ 15 Reassemble the Gear Train
___ 16 Use compressed air to work oil into the gears
___ 17 Wipe out excess oil
___ 18 Conduct mechanical alignment of the Gear Train
___ 19 Deoxit all the tube socket pins
___ 20 Deoxit all the connector sockets
___ 21 Deoxit all the plug pins
</HTML>