[R-390] C. Cosmetic Clean Up

Flowertime01 at wmconnect.com Flowertime01 at wmconnect.com
Sun Mar 20 12:07:26 EDT 2011


C. Cosmetic Clean Up
___ 01 Remove all of the knobs and lightly lube the set screws
___ 02 Pull all of the modules out of receiver
___ 03 Drop the front panel
___ 04 Rip it's gizzard out and scatter and toss the parts around
___ 05 Try but manage to not loose any of the parts
___ 06 Do not have any extra parts left over when finished
___ 07 Pull all the tube shields
___ 08 Pull all the tubes
___ 09 Remove the RF slug racks and springs
___ 10 Wipe each of the RF cores out with a damp Q-tips
___ 11 Wipe the slugs off, and eye ball them
___ 12 R390A All of the RF slugs are all the same
___ 13 R390A All of the Variable six IF slugs are the same
___ 14 R390 RF slugs type a
___ 15 R390 RF slugs type b
___ 16 R390 First IF slugs
___ 17 R390 Second IF slugs
___ 18 Remove the RF coil can assemblies
___ 19 Straighten the IF and RF can assemblies as needed
___ 20 Verify that the index washers were installed in the two big knobs
___ 21 Give the chassis a bath with soap and water let dry
___ 22 Wash the front panel with soap and water let dry
___ 23 Wash the modules with soap and water let dry
___ 24 Do not take apart the 6 camshafts and the antenna trimmer can.
___ 25 Do not oil the antenna trimmer insulating fiber washers
___ 26 Do not saturate / soak / submerge the slugs
___ 27 Clean the slug rack rollers by working penetrating oil into rollers
___ 28 Keep lubing and wiping them until only clean oil comes out
___ 29 Deoxit the tube sockets and coil sockets
___ 30 Deoxit the RF band switch
___ 31 Give rest of RF deck a bath (hard core or cosmetic)
</HTML>


More information about the R-390 mailing list