[R-390] need help with390A RF dedk

[rbethman]

Russ,

You are going to HAVE to drop the front and perform the mechanical 
alignment of the gear train.

The veeder root counter will need to be set to 7000.0+.  This will be 
with the KC at its 10 turns fully CW.

Make sure the MC switch detent is set to 7.

Align all gear lobe pointed portions to align with the marks on the 
front of the slug racks.

It sounds as though someone just threw it together without paying ANY 
attention to the mechanical positioning.

Have you got the Y2K manual?

Bob - N0DGN

wb3fau at att.net wrote:
> Some helpful pointers on getting my 390a project  running.  I cannot hear any signals.  I do see
> that  it  is out  of mechanical  alignment.  Turning the MC. knob it will only run up  to 26 mc at that point  it seems to  jam, will  not turn  any further.  10 turn stop is at zero CCW when display says 00MC.  Any thoughts?  Russ WB3FAU.        
>
> _____________________________________________________________
> R-390 mailing list
> Home: http://mailman.qth.net/mailman/listinfo/r-390
> Help: http://mailman.qth.net/faq.htm
> Post: mailto:R-390 at mailman.qth.net
> Unsubscribe: http://mailman.qth.net/mailman/options/r-390
>
>