[R-390] Dead R-390A

[Cecil Acuff]

Bill are you still getting signal indications on the S meter on a known 
frequency such as 10 Mhz?

You are sure all tubes have filaments lit....including the PTO?  What are 
you using for a ballast?

Cecil....
----- Original Message ----- 
From: "Bill Keller" <kellerfamily01 at charter.net>
To: <r-390 at mailman.qth.net>
Sent: Saturday, February 19, 2005 5:00 PM
Subject: [R-390] Dead R-390A


Hi, Group.  I've got a problem and need some advice.  My R-390A just went 
dead - no sound, not even a calibration signal.  All the tubes and dial 
lamps are still lit up, and the fuses all check ok.  I've checked the 
speaker and all associated connections and they're fine.  Before I start 
doing things I may not need to do, does anyone have an idea to share with me 
that might help me find the trouble quicker.
Thanks,
Bill K.

_____________________________________________________________
R-390 mailing list
Home: http://mailman.qth.net/mailman/listinfo/r-390
Help: http://mailman.qth.net/faq.htm
Post: mailto:R-390 at mailman.qth.net
Unsubscribe: http://mailman.qth.net/mailman/options/r-390