[R-390] 7 +000 alignment

[KC8OPP Roger S.]

Collin,

This may not be too elegant, but I have done this once
or twice.  With a straight edge and a pencil, extend
the lines to a point where you can see them.

I seem to remember that the hole in the cam is in line
with the point, but that is an old memory talking!

Good Luck

Roger
KC8OPP


--- n4tua at aol.com wrote:

> Hello Friends,
> I have a question concerning the mechanical
> alignment at 7 +000 of the 
> cams. My Motorola has lines but they are not long
> enough to be seen 
> through the holes. My question is: Does the tip or
> high part of the cam 
> line up the same as the hole? In other words can I
> use the tip of the 
> cam to line up with the line? Or is it that
> critical? I can see how the 
> hole can be very accurate alignment, but that line
> is not real fine. 
> Any help would be appreciated. I have the gear train
> cleaned, deburred 
> and back together, and am working on the mechanical
> alignment now.
> 
> Progress at: www.hometown.aol.com/n4tua/main.html
> 
> Thanks, Collin
>
_____________________________________________________________
> R-390 mailing list
> Home: http://mailman.qth.net/mailman/listinfo/r-390
> Help: http://mailman.qth.net/faq.htm
> Post: mailto:R-390 at mailman.qth.net
> Unsubscribe:
> http://mailman.qth.net/mailman/options/r-390
> 


__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com