[R-390] connector with broken pin R-390A

[Miguel Bravo]

Hello Wally,

Simple?, You have been thinking a lot. Thank you.

But then this module can only be used in this radio?.

What I want is the posibility to put a new pin instead. I don't know if the
pins are removables as in anothers connectors are or, murphy watching, they
are molded together.

Regards

Miguel Bravo

----- Original Message -----
From: "LI WHA HO WALLY" <k5op@yahoo.com>
To: "Miguel Bravo" <mbravoc@wanadoo.es>
Sent: Monday, March 10, 2003 10:20 PM
Subject: Re: [R-390] connector with broken pin R-390A


> Miguel, I have had this happen... Since all of the
> pins on J-620 are in use you have to create an extra
> pin... This is easy to do... Find pins 9 & 10 on
> J-620.. Then you unsolder them from J-620 and solder
> them together and tape the joint... Now you run a wire
> from pin nr 1 on P-120 to pin nr 10 on P-120.. Now you
> take the wire to J-620-1 and C604 and connect it to
> pin nr 10 of J-620... Now your radio works with either
> audio module...  Simple...  73's  WALLY  K5OP