[R-390] Big Mistake Please Help
Roy Morgan
[email protected]
Mon, 22 Dec 2003 15:52:39 -0500
At 07:32 PM 12/19/03 -0500, David Hallam wrote:
>Ronnie,
>
>Don't know about the 390A but on the 390 the end points of the PTO are 3.455
>and 2.455 MHz. If you use your frequency counter to set the PTO to 2.955
>MHz and set the counter to 500, you can lock the shaft to your tuning knob.
CAREFUL!
Note Tom M's later post.
(the PTO frequency in the opposite direction from dial frequency):
>The 390 and 390A have the same output in frequency on the PTO, that is on 000
>the PTO will generate 3455 kcs, at the top end of its range it generates 2455
>KCS. If you have a frequency counter, this is the safest way to set it up.
Roy
- Roy Morgan, K1LKY since 1959 - Keep 'em Glowing!
7130 Panorama Drive, Derwood MD 20855
Home: 301-330-8828 Work: Voice: 301-975-3254, Fax: 301-948-6213
[email protected] --