[R-390] removing cigarette smoke

[Barry Hauser]

Hi Randy:

First thing to try is just some plain soapy water -- from regular Ivory type
bar soap.  The water should be very warm and use a soft cloth to avoid
abraiding the silk screening.

If that doesn't seem to work, waterless hand cleaner, such as GoJo should
work safely.  I've used that with success -- it doesn't lift the paint or
dull the surface.  But be sure you get the regular, original version of the
waterless hand cleaner.  They have two types -- original non-abrasive, and
with abrasive additives, like pumice.  You don't want the latter.

Barry

----- Original Message -----
From: <R390rcvr@aol.com>
To: <r-390@mailman.qth.net>
Sent: Thursday, February 07, 2002 8:11 AM
Subject: [R-390] removing cigarette smoke


> Dear List:
>
> I need suggestions on how to safely remove smoke from the front panel of a
> R-390A. Silk screened. The nicotine stains are pretty bad, and I don't
want
> to remove the silk screening along with the stains. Any safe, magic
formulas
> out there?
>
> Thanks
>
> Randy
> _______________________________________________
> R-390 mailing list
> R-390@mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/r-390
>