[R-1051] Progress Report. R-1051B

[paul swed]

Congratulations on restoring a fine receiver back into service.
Regards
Paul
WB8TSL

On Fri, Feb 15, 2013 at 2:16 PM, Charlie Hugg <k5mbx at hug-a-bug.com> wrote:

> Thanks to all of the help that I received from this group, I have the
> R-1051B up and running. The main thing I did to get it going was to remove
> the RF Module and make sure that the coupling wheels were mated between the
> main frame and the module, thanks to Steve Hobensack's suggestion.  I think
> they were, but when I replaced the module, everything    started working.
> Either the couplers where not mated correctly or just unplugging and
> reinserting the unit made good contact on the cable pins. I had lots of
> suggestions from others in the group.
>
> Thanks again,
>
> Charlie Hugg, K5MBX
>
> Abilene, Texas
>
>
>
> ______________________________________________________________
> R-1051 mailing list
> Home: http://mailman.qth.net/mailman/listinfo/r-1051
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:R-1051 at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>