[R-1051] R-1051 plug

[Steve Hobensack]

Lee, I forgot to add my thoughts on the frequency. If every frequency from 2 
  to 30 mhz is off 3 khz, It most likely would be the gear chain or gear 
clamps slipping in the KC selector knob. Maybe the numeral disk behind the 
window has slipped. If it is just some bands or frequencies off, It could be 
a can of worms. It being the F model isn't good because there doesn't seem 
to be a lot of data published on the late models.
...Steve...N8YE


>From: "L.D. Ritta" <UFP at optusnet.com.au>
>Reply-To: R-1051 Discussion Group <r-1051 at mailman.qth.net>
>To: <r-1051 at mailman.qth.net>
>Subject: [R-1051] R-1051 plug
>Date: Tue, 20 Dec 2005 21:39:18 +1030
>
>
>Howdy Folks
>
>I have finally got a R-1051F after over 3 years trying but I need the power
>socket, can someone tell me where I can buy one etc. I'm told it is 3kc off
>frequency any ideas where to start looking? anyone with a manual for the
>R-1051F/URR?
>
>
>73 Lee VK5ZNA
>
>_______________________________________________
>R-1051 mailing list
>R-1051 at mailman.qth.net
>http://mailman.qth.net/mailman/listinfo/r-1051