[R-1051] R-1051 multicircuit connector

[Cecil Acuff]

Mike,

        Drop a note to Andy Moorer at jamminpower.com.  He has my H manual 
to scan an put on his web page...if he has the time he might be able to look 
it up for you...

I'm surprised it's not the same as the Plain, B, D etc....they are all 39 
pin connectors...that's all I have ever seen.  I did have an H through the 
shop recently but don't remember looking. (Chuck Rippels)

Cecil....
----- Original Message ----- 
From: "mikea" <mikea at mikea.ath.cx>
To: "R-1051 Discussion Group" <r-1051 at mailman.qth.net>
Sent: Wednesday, October 13, 2004 12:37 PM
Subject: Re: [R-1051] R-1051 multicircuit connector


> On Tue, Oct 12, 2004 at 03:29:38PM -0500, mikea wrote:
>> On Thu, Oct 07, 2004 at 08:14:08PM -0500, Cecil Acuff wrote:
>> > Hey Guys,
>> >
>> >         My connector (chassis mount 39 pin) is made by Bendix. It is
>> > marked PT 07A20-39P. The B manual does not give the mating connector
>> > designation. The above number should get you in the ball park...
>>
>> > Good luck!
>>
>> I expect the mating connector is "PT 07A20-39J" pr "PT 07A20-39S".
>>
>> Examination of the R-1051 "H" model here shows an completely different
>> connector, apparently Amphenol bayonet-lock "MS"-like, with only _12_
>> pins. It even seems to be in the Allied (and DigiKey and Mouser, too)
>> catalogs, for a wonder. Anyone got an "H" model manual who is willing
>> to scan-and-mail me the schematic for the case, with pinout for J4?
>> I'm planning to keep the "H" model, but the "B" may be going to a new
>> home. I hope.
>
> Greg Mengell wrote in an earlier reply:
>
>> Connector part number should be in manual . Good luck,Gregory
>
> which is all very well if one has the manual for the R-1051H; I don't.
>
> But it appears to be an Amphenol MS/PT solder type connector, with
> insert 14-12. and so I think the mating plug (with socket contacts)
> would be Amphenol PT06A-14-12S, or PT06A-14-12S-SR if you want a
> strain relief.
>
> $23.07 at Mouser for the -SR flavor, from the online catalog
> $29.34 at Allied ditto (last year's paper catalog),
> $25.54 at DigiKey ditto, from the online catalog.
>
> Anyone care to supply connector pin counts and patterns, etc., for
> J4 on the other (basic, C, D, E, F, and G) models of R-1051?
>
> And again, if someone has a manual for an H model and can supply J4
> pinouts, they'll be welcome.
>
> -- 
> Mike Andrews
> mikea at mikea.ath.cx
> Tired old sysadmin
> _______________________________________________
> R-1051 mailing list
> R-1051 at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/r-1051