[R-1051] R-1051 multicircuit connector

[mikea]

On Tue, Oct 12, 2004 at 03:29:38PM -0500, mikea wrote:
> On Thu, Oct 07, 2004 at 08:14:08PM -0500, Cecil Acuff wrote:
> > Hey Guys,
> > 
> >         My connector (chassis mount 39 pin) is made by Bendix. It is
> > marked PT 07A20-39P. The B manual does not give the mating connector
> > designation. The above number should get you in the ball park...
> 
> > Good luck!
> 
> I expect the mating connector is "PT 07A20-39J" pr "PT 07A20-39S".
> 
> Examination of the R-1051 "H" model here shows an completely different
> connector, apparently Amphenol bayonet-lock "MS"-like, with only _12_
> pins. It even seems to be in the Allied (and DigiKey and Mouser, too)
> catalogs, for a wonder. Anyone got an "H" model manual who is willing
> to scan-and-mail me the schematic for the case, with pinout for J4?
> I'm planning to keep the "H" model, but the "B" may be going to a new
> home. I hope.

Greg Mengell wrote in an earlier reply: 

> Connector part number should be in manual . Good luck,Gregory

which is all very well if one has the manual for the R-1051H; I don't.

But it appears to be an Amphenol MS/PT solder type connector, with 
insert 14-12. and so I think the mating plug (with socket contacts)   
would be Amphenol PT06A-14-12S, or PT06A-14-12S-SR if you want a      
strain relief.                                                        

$23.07 at Mouser for the -SR flavor, from the online catalog
$29.34 at Allied ditto (last year's paper catalog), 
$25.54 at DigiKey ditto, from the online catalog.

Anyone care to supply connector pin counts and patterns, etc., for 
J4 on the other (basic, C, D, E, F, and G) models of R-1051?

And again, if someone has a manual for an H model and can supply J4 
pinouts, they'll be welcome.

-- 
Mike Andrews
mikea at mikea.ath.cx
Tired old sysadmin