[PVRCNC] [PVRC] N1MM help

[James Jordan]

Thanks Pete. 
I'll put some (wish it wasn't necessary) time to analyze what was happening and follow it up. I'm not on the forum. It may be settings or more likely incorrect coding for Orion filter commands in MM, but NOT internal in radio. Never happens with manual changes. The 400hz BW jump is not an Orion default setting. Actually there are no default filter settings in an Orion. Wish there were no default filter settings in MM. 
73,
Jim

Sent from my iPhone

> On Nov 30, 2014, at 9:22 PM, Pete Smith N4ZR <pete.n4zr at gmail.com> wrote:
> 
> Frankly I'd be surprised if N1MM Logger+ was doing this to you, Jim.  More likely it ios something in youyr radios' settings, or something in N1MM+ settings that is set incorrectly.  I was pouncing on spots allweekend and never experienced anything like this.  Why not ask about it on the N1MM+ reflector?
> 73, Pete N4ZR
> Check out the Reverse Beacon Network at 
> http://reversebeacon.net, 
> blog at reversebeacon.blogspot.com.
> For spots, please go to your favorite 
> ARC V6 or VE7CC DX cluster node.
> On 11/28/2014 10:14 PM, Jim K4QPL wrote:
>> I'm using latest version of MM (19.43.10.0) 
>>  
>> Running two radios Orion II and Kenwood 590S cw. They work fine with
>> computer with frequency readout and control, etc.
>>  
>> However, whenever I click on a spot (either radio) it changes filter
>> settings and/or CW/CWReverse. How can I make it just leave my darn filters
>> and CW alone??? It also changes them when I click on narrow or wide, but
>> changes from whatever I set to some "default" on the set filters menu. I've
>> tried changing those numbers and it still does it. Also tried putting in
>> gibberish for the filter code. It sometimes stops changing filter width but
>> not cw-r.
>>  
>> Isn't there someway to disable changing settings on my radios? I can't find
>> anything other than right clicking on set Transceiver Filter Codes. There's
>> no option to not mess with filters as far as I can see.
>>  
>> Driving me crazy in WW as spots show up in wrong place and have to tune.
>>  
>> Any help most welcome. Thanks.
>>  
>> Jim, K4QPL
>> ______________________________________________________________
>> PVRC mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/pvrc
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:PVRC at mailman.qth.net
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> 
>