[PVRCNC] RTTY and MMTTY

[Wes Quinn]

Hello,

Is there anyone out there that is familar with MMTTY?

I'm trying to get it to work with a Kenwood TS-2000 rig.  I can receive =
fine, but it isn't transmitting.

I had it working before with an old TNC, but that has stopped working a =
few days ago, so I know I'm using the correct pins on the 13 pin DIN =
going to the rig.

I had to build 2 small circuits using an NPN transistor (2n3904) and a =
1k resistor on the base to the DB9 connector, then the collector goes to =
the rig, and the emitters are tied together connected to the DB9 as =
ground for each circuit.

I've gone through the AA5AU tutorial and help screens too and I'm stuck =
for new ideas to try.

Any help is appreciated.

TIA es 73,
Wes K4WES


--- StripMime Report -- processed MIME parts ---
multipart/alternative
  text/plain (text body -- kept)
  text/html
The reason this message is shown is because the post was in HTML
or had an attachment.  Attachments are not allowed.  To learn how
to post in Plain-Text go to: http://www.expita.com/nomime.html  ---