[Pro2006] Opto Boards

Sun, 22 Sep 2002 17:13:32 -0400

for what is worht the 780 is computer controllable and mil airband ready, no
addons and rs232 port is there, only need the software (as u would for the
2006)  not defending either system (pro 2006 or bc 780) but for the average user
with least amount of cash to spend i would suggest the 780 and no installation
of hardware.  Throw in trunking out of the box seems like a no brainer.  I love
my pro2006 and 2004 but todays options are bettter, for a scanner to make 10
years was very good.  Going price for 2006 about 300 on ebay plus u say 150 for
the optoboard witn no trunking, bc 780  for $340, everone can make ther own
decision, just my opinion.

Ted

radionut wrote:

> --> My reply to what ted hay wrote 9/22/02 3:29:36 PM
>
> The opto boards do go that high sometimes but they seem to be coming down
> from that and have seen some for $150.00 or less for full boards, at that
> price I think it would be worth it to keep the 2006 it is a great military
> air and general scanner, then as he can get the 780 for the turnking
>
> ----------------------- Original Message ------------------------------
>
> if you have to spend $300 on a opto board i would waste it on a bc780, much
> better deal, forget the cell block stuff, not worth it, dead issue in many
> places]
>
> Ted
>
> Bc 780  and 2006 owner
>
> intoodeep wrote:
>
> > could u please send me an email when you are ready to sell those boards.
> > thanks
> > ----- Original Message -----
> > From: "tvnews" <[email protected]>
> > To: <[email protected]>
> > Sent: Saturday, September 21, 2002 7:26 AM
> > Subject: [Pro2006] Opto Boards
> >
> > >
> > > Actually...... I have three opto boards new in the box. As soon as I
> > > find time to dig them out of the closet I plan to post them on ebay. I
> > > just can't remember if they are the OS456 board or the OS5XX board. I do
> > > know they are the full version and not the lite.
> > >
> > > Dean
> > > WB2CMN
> > >
> > > > Dart Humeston wrote:
> > > >
> > > > >I was into scanning ten years ago, but divorce and other matters
> > > > distracted
> > > > >me. The Pro-2006 has been in storage for the last ten years. Back
> > > > then,
> > > > >trunking was making scanning difficult. I see there has been a lot of
> > > > >advances! My Pro 2006 works perfectly and even still has old
> > > > frequencies
> > > > >from 1990 programmed into memory,  as I left it plugged in all these
> > > > years!
> > > > >As I return to scanning, what do I need to do to upgrade my Pro 2006?
> > > > What
> > > > >is the best method for trunking, and computer assisted controls, etc?
> > > > Can
> > > > >someone be kind enough to update me?
> > > > >
> > > > >Thanks!
> > > > >
> > > > >Dart Humeston
> > > > >Pembroke Pines, Florida
> > > > >
> > > > >
> > > > >
> > > >
> > > > The best way to update it would be adding the
> > > > Optoelectronics OS456 board and run the
> > > > Probe software with it, but the boards are
> > > > no longer produced/available (Probe still is). You may find a
> > > > 2006 out there with a board installed. I doubt you would
> > > > find a just the board available, but with E-Bay you never know.
> > > > http://www.datafileinc.com/
> > > >
> > > >
> > >
> > >
> > > --- StripMime Report -- processed MIME parts ---
> > > multipart/alternative
> > >   text/plain (text body -- kept)
> > >   text/html
> > > The reason this message is shown is because the post was in HTML
> > > or had an attachment. Attachments are not allowed.
> > > Please post in Plain-Text only.---
> > > _______________________________________________
> > > Pro2006 mailing list
> > > [email protected]
> > > http://mailman.qth.net/mailman/listinfo/pro2006
> > >
> >
> > _______________________________________________
> > Pro2006 mailing list
> > [email protected]
> > http://mailman.qth.net/mailman/listinfo/pro2006
>
> _______________________________________________
> Pro2006 mailing list
> [email protected]
> http://mailman.qth.net/mailman/listinfo/pro2006
>
> [Some portions of this message may have been removed]
>
> --------------------- Original Message Ends ------------------------
>
> _______________________________________________
> Pro2006 mailing list
> [email protected]
> http://mailman.qth.net/mailman/listinfo/pro2006