[Premium-Rx] Drake MSR/FM-P Counter Card

[Jim Garland]

Hi John,
I have a new and unused counter PCB for a Drake MSR/DSR-2 which sounds like
what you need. It is shown as module A17 in the MSR-2 manual. The label on
the wrapping says 201-0135 and the board has the indentification marking
C3606W.  Is this what you're looking for?   Is the board that came with your
receiver broken, or is it missing? If the former, it should be easy to
repair.
73,
Jim W8ZR

> -----Original Message-----
> From: premium-rx-bounces at mailman.qth.net [mailto:premium-rx-
> bounces at mailman.qth.net] On Behalf Of John Hafele
> Sent: Thursday, March 22, 2012 7:41 PM
> To: premium-rx at mailman.qth.net
> Subject: [Premium-Rx] Drake MSR/FM-P Counter Card
> 
> Greetings to all:
> I am in need of a working counter card (A17) for the Drake MSR/FM-P Marine
> receiver.
> The part number is 689-1700 and it is used in all of the various MSR
series
> units, as well as, the DSR-2 series receivers. Further research indicates
> that it is also used in the older DSR-1 receivers. The same part number is
> utilized for all of the aforementioned receivers although the diagram
> location numbers very from model to model ie: A17, A12, etc.
> I would truly appreciate the chance to pick up a working card or any leads
> that I may pursue, in order to, obtain one of these cards. Kindly contact
me
> offline via my email address. Thanks so much for your kind consideration.
> Regards, John.
>