[Premium-Rx] Looking for Cubic 3030 PS module and or repair source

[libbysales]

Scott:  I have used Steve Horton 770~547-6131  down in Georgia,  over the 
years he has worked wonders on the items I have sent for repair,  including 
Collins HF-80 items, Harris 590 and 1310 stuff as well my Cubic 3030A  I 
forget now what it was that was wrong,  but it was a clear case of the smoke 
coming out of a Module and the set not working...  as well he fixed the 
crappy keypad that as we know so often pulls away from the buttons behind 
the pad/screen... I cant speak highly enough of him

mac/mc  w5merry christmas

--------------------------------------------------
From: <Ka9p at aol.com>
Sent: Tuesday, December 27, 2011 4:43 PM
To: <premium-rx at mailman.qth.net>
Subject: [Premium-Rx] Looking for Cubic 3030 PS module and or repair source

> Greetings.
>
> I'm looking for either:
>
> 1) a PS module for a Cubic 3030 (assy num. 2140-1124)
>
> 2) a good Cubic mechanic; or
>
> 3) a good idea what to check.  The module fault light is lit, 
> infrequently
> the PS will work and light will go out after cyling through the  modules,
> and stays working as long as powered up, but when left sitting  more than
> about an hour the PS module will not restart 99 times out of a  hundred. 
> The
> module behaves the same way in either slot in the 3030 and the  other PS
> module performs well in either slot so it's definitely the  module.
>
> Appreciate any ideas or help - I started after the electrolytics with my
> ESR meter either and found the meter dead (groan)  ohmmeter shows nothing
> interesting - I'm hoping trouble does not come in threes :))
>
> Thanks, Scott
> ______________________________________________________________
> Premium-Rx mailing list
> Home: http://mailman.qth.net/mailman/listinfo/premium-rx
> Help Page: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Premium-Rx at mailman.qth.net
> Help Contact eMail:  paul at 8zo.com
> Home Page:  http://www.premium-rx.org/