[Premium-Rx] Cubic 3030 info requested.

[Hans.Hamradio]

Hi John and other repliers to my request.

Tnx for great response and support.
As requested there is some further information made available which will clarify/help:

The memory chips in both CPU modules have a red circular sticker with "R3030 V2-2 9-17-85". There is also a white sticker on the top of the module saying "PROGRAM MEMORY 2143-3110"

The CPU modules are marked like this:

Assy No. 2140-1110, S/N 30585-30 
Assy No. 2140-1110, S/N 30685-30

The IEEE-488 module is marked like this:

Assy No. 2140-1112, S/N 05385-30

The top cover is marked: R-3030 (V). Apparently there has been a military type tag under the left front handle, but this has been removed.

It does not have a fan, and it has the MS type audio connector (military round multipin).

Regards and thanks in advance for the reply.

Hans


  ----- Original Message ----- 
  From: John 
  To: premium-rx at ml.skirrow.org 
  Sent: Thursday, November 17, 2005 12:41 AM
  Subject: Re: [Premium-Rx] Cubic 3030 info requested.


  Hi,

  John Collins here

  I'll doble check my info here, but in the meantime, pop the top cover and jot down the versions as noted on the CPU and Serial/IEEE488 module.  It's important for us to know for sure:  do you have R3030 or R3030A?  Further is there a secondary military classification number on the tag?

  The two version "A" and "not A" are very similar, but will differ in firmware versions, remote control type and version, IF filters, rear panel connections and connectors, and keypad buttom vs function assignments.  Therefore, the key push for "A" vs "NOT A" may be different.  Be aware also that there are several versions of the manual...all very similar but different just like the rx's.

  Also, if you have the "A" version, I have a couple of mods I can forward.

  please advise

  John
  ______________________________________________________________
    ----- Original Message ----- 
    From: Hans.Hamradio 
    To: premium-rx at ml.skirrow.org 
    Sent: Wednesday, November 16, 2005 5:41 AM
    Subject: [Premium-Rx] Cubic 3030 info requested.


    Hi to the group cubic specialists:

    A friend of my bought a cubic 3030 on Epay and has the following request:

    At the moment I've two questions:

    (1) Is there a master reset to get the factory settings?
    (2) It seems that both receivers do not respond properly to the commands 
    for displaying the software versions. My manual specifies this sequence: 
    "RCL, SKIP, 1, ENT", but nothing happens.

    Please let me have your reply and the possible name of an Cubic Guru.

    Tnx Hans PA1AMS in AMSterdam NL.



----------------------------------------------------------------------------


    _______________________________________________

    Premium-Rx Mailing List
    To Post: premium-rx at ml.skirrow.org
    For Info: http://ml.islandnet.com/mailman/listinfo/premium-rx
    Visit the Website: http://kahuna.sdsu.edu/~mechtron/PremRxPage/



------------------------------------------------------------------------------


  _______________________________________________

  Premium-Rx Mailing List
  To Post: premium-rx at ml.skirrow.org
  For Info: http://ml.islandnet.com/mailman/listinfo/premium-rx
  Visit the Website: http://kahuna.sdsu.edu/~mechtron/PremRxPage/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mailman.qth.net/pipermail/premium-rx/attachments/20051117/c8c287f1/attachment.htm