[Premium-Rx] Watkins Johnson 861X X-1 S1 VHF UHF Frequency Extension

[John]

Watkins Johnson 861X X-1 S1 VHF UHF Frequency ExtensionHi Alan,

I don't have the documentation in hand, so this may be easier or harder than I describe, but I think the S1 versions are pre-firmwared for all the options--that is, a switch flip will arm the option, and if the proper option is plugged in (it must be a S1 version option), the receiver will be set up for extended tuning.  Obviously, you'd need the cables and hardware, but that is usually found on the option already.  I'm pretty sure that the rx and option firmwares have to match, etc etc.  If you need more info, I may have a manual whose thrust is to guide the field installation of the option.  Please advise if you do need it, and I can dig through the move boxes here.

overall, good luck to you on this

John
___________________________________________
  ----- Original Message ----- 
  From: Royce, Alan (Space Technology) 
  To: premium-rx at ml.skirrow.org 
  Sent: Wednesday, November 16, 2005 12:29 PM
  Subject: [Premium-Rx] Watkins Johnson 861X X-1 S1 VHF UHF Frequency Extension


  There seems to be a number of 861X-X 1 S1 receivers out there. 
  A few have the low frequency option  and the FEX option which goes to 1200 MHz. 
  Hardware wise they all look the same. 
  What is needed to add the low frequency option and the high frequency options? 
  If it is E proms, does any one sell them as a programmed set? 
  Thanks 
  Al 



------------------------------------------------------------------------------


  _______________________________________________

  Premium-Rx Mailing List
  To Post: premium-rx at ml.skirrow.org
  For Info: http://ml.islandnet.com/mailman/listinfo/premium-rx
  Visit the Website: http://kahuna.sdsu.edu/~mechtron/PremRxPage/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mailman.qth.net/pipermail/premium-rx/attachments/20051116/ff885b3d/attachment.htm