[Premium-Rx] Collins 95S-1 DSP Receiver

[John Miles]

It was offered as a bare board (95S) as well as a self-contained radio 
(95S-1A).  He might have the bare board.

-- john KE5FX

>I don't have a schematic or manual but that radio should have an internal 
>power supply as well as an internal speaker.  Unless you're determined to 
>runit off DC I wonder why you need this info.
>
> The serial port is a standard RS-232.  You will need the manual or the 
> Collins software to run it, as there are a bazillion commands (that must 
> be sent in the proper syntax) to set the various functions.
>
> Believe the DIP switch is to set the RS-232 speed, # of bits, etc.  IIRC 
> it defaults to 9600.  A few minutes with windows terminal program should 
> figure it out.
>
> Get the radio powered up first, then the rest should follow fairly easily.
>
> This is an outstanding radio in every respect, and I'm sure you'll be 
> impressed when you get it working.
>